Sanyo PLC-XP21N - Manual (Page 6)

INFRARED
REMOTE
RECEIVER
6
EXHAUST VENT
CAUTION HOT AIR!
Air blown from the exhaust vent is hot.
Observe the following when handling your
projector or choosing a location to install it.
● Keep heat-sensitive objects away from the
exhaust port.
● If you set the projector on top of a metallic
surface, the surface will become hot because of
the hot air exhaust. Be careful when handling.
● Do not touch the cabinet near to the exhaust
vent area, and especially screws and metallic
parts. These parts will become hot while the
projector is used.
FRONT OF THE PROJECTOR
REAR OF THE PROJECTOR
SPEAKERS
INFRARED
REMOTE
RECEIVER
PROJECTION LENS
REMOVABLE
LENS COVER
MAIN ON/OFF
SWITCH
CARRYING
HANDLE
POWER CORD
CONNECTOR
ADJUSTABLE
FEET
AIR INTAKE VENT
BOTTOM OF THE PROJECTOR
LAMP
COVER
NAME OF EACH PART OF THE PROJECTOR
INSTALLATION
AIR INTAKE VENT
FEET LOCK
LATCH
FEET LOCK
LATCH