Making and answering calls, Making calls – Samsung VM-A680 User Manual
Page 30

Section 2A: Your PCS Vision Phone - The Basics
22
Making and Answering Calls
Making Calls
Placing a call from your PCS Phone is as easy as making a call from
any land-line phone. Just enter the number and press
and you’re
on your way to clear calls.
To make a call using your keypad:
1.
Make sure your phone is on.
2.
Enter a phone number. (If you make a mistake while dialing,
press
to erase one digit at a time. Press and hold
to
erase the entire number.)
3.
Press
. (To make a call when you are roaming and
Call Guard is enabled, press
and then
. See “Call
Guard” on page 60.)
4.
Press
or close the phone when you are finished.
You can also place calls from your PCS Phone by using PCS Voice
Command
SM
(page 163), Speed Dialing numbers from your Phone
Book (page 29), and using your Call History listings (page 81).
Tip:
To redial your last outgoing call, press
TALK
twice.
When making calls while roaming off the Sprint Nationwide PCS
Network, always dial using 11 digits (1 + area code + phone number).
Tip:
To speed dial a phone number from standby mode, press and hold the
speed dial number. If the speed dial number is two digits, enter the first
digit, then press and hold the second digit. (For information on setting up
speed dial numbers, see “Assigning Speed Dial Numbers” on page 87.)
(This feature will not work when you are roaming off the Sprint
Nationwide PCS Network; when roaming you must dial using eleven
digits [1 + the area code + the seven-digit phone number.])