Samsung VM-A680 - Manual (Page 148)

Section 3B: PCS Vision 140
Net Guard
When you first connect to the Web, the Net Guard will appear to
confirm that you want to connect. This feature helps you avoid
accidental connections. You can disable the Net Guard in the future
by selecting Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
1. Press for Settings.
2. Press for PCS Vision.
3. Press for Net Guard.
4. Press the navigation key up or down to select On or Off.
5. Press to Save.
PCS Vision Connection Status and Indicators
Your phone's display lets you know the current status of your
PCS Vision connection through indicators which appear at the top
of the screen. The following symbols are used:
Your PCS Vision connection is active (data is being transferred);
the transmit/receive symbol will blink to indicate data
transmission. Incoming voice calls go directly to voicemail;
outgoing voice calls can be made, but the PCS Vision
connection will terminate.
Your PCS Vision connection is dormant (no data is being sent
or received). Though not currently active, when dormant the
phone can restart an active connection quickly; voice calls can
be made and received.
Your phone is not currently able to access PCS Vision service
features.
If no indicator appears, your phone does not have a current
PCS Vision connection. To launch a connection, see “Launching a
PCS Vision Connection” on page 139.
Note: When enabled, the Net Guard appears only once per session. The Net Guard
does not appear if the phone is merely re-connecting due to a time-out.