Sony SPP-A2470 - Manual (Page 60)

Additional Information 60 US
Mounting the base unit on a wall
1
Raise the hang up tab.
2
Plug the telephone line cord to
the LINE jack and the AC power
adaptor to the DC IN 9V jack,
and hook the cords. Use the
shorter cord for mounting.
3
Attach the wall bracket to the
center of the base unit.
Align the f marks of the wall
bracket with those of the base
unit.
4
Plug the telephone line cord to
the telephone outlet, and hook
the base unit to the wall plate.
5
Plug the AC power adaptor to
an AC outlet. Then raise the
antenna so that it points
towards the ceiling.
Tip
To remove the wall bracket, press the lower tabs.
Additional Information
1
Hang-up tab
2
Telephone
line cord
AC power
adaptor cord
1
2
3
Wall
bracket
4,5
Telephone
line cord
AC power
adaptor
Wall
plate
AC outlet