Sony SPP-A2470 User Manual
Page 56
56
US
Caller ID Features
Storing a number of the Caller ID list into
the Phone Directory
1
Display the name and phone number you want
to store from the Caller ID list (see page 52).
2
Confirm the number and press Jog Dial.
3
Turn Jog Dial up to make “PGM” flash and
press Jog Dial.
The cursor flashes at the end of the name.
Enter or change the name, if necessary (see page
29).
4
Press Jog Dial.
The cursor flashes at the end of the phone
number.
Enter or change the phone number, if necessary
(see page 29).
5
Press Jog Dial again.
You hear a long confirmation beep and the
name and number are stored.
Notes
• Do not allow more than 20 seconds to elapse during the operation procedure.
• If the number displayed in step 1 is not the one you should store, you can
change the number of digits of the phone number as described on page 57.
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
Using the Caller ID list (continued)
SMITH JOHN
1-201-123-4567
DIAL PGM ERASE
1-201-123-4567
SMITH JOHN
1201123456
7
SMITH JOH
N
12011234567