Sony SPP-A2470 - Manual (Page 14)

Getting Started 14 US
Entering the area code
When you use this phone for the first time, or move to an area
that has a different area code, you must enter the area code.
Otherwise, you cannot use some functions of this phone and the
Caller ID functions.
This is also necessary because the phone must be able to select an
area code to properly dial call from the Caller ID list.
Depending on your region, enter 3-digit area code as follows:
Case 1.
If 7-digit dialing (no area code) is accepted for local calls in your area,
see “To enter your home area code” below.
If you live in an area where calls from or to other local areas can also be made
by 10-digit dialing (area code + number), you can register up to 5 local area
codes with this telephone to take advantage of this system. See “To enter the
local area code (For 10 digits phone number users)” on page 15.
Case 2.
If 10-digit dialing (area code + number) is required for all local calls in
your area, see “To enter the local area code (For 10 digits phone
number users)” on page 15.
To enter your home area code
1
Press (PGM).
2
Turn Jog Dial down to make “HOME
AREA CODE” flash.
3
Press Jog Dial.
“ENTER AREA CODE” appears on
the display.
4
Enter the three digits of your home
area code using the dialing keys.
5
Press (PGM).
You hear a long confirmation beep.
Step 4
Turn Press
HOME AREA CODE
LOCAL AREA CODE
ENTER AREA CODE