Sharp DT-300 - Manual (Page 24)

Connections and Setup
-23
1
2
3
Setup
Caution
• Do not hold the lens when lifting, lower-
ing or rotating the projector.
• When lowering the projector, be careful not
to get your fingers caught in the area be-
tween the Swivel Stand and the projector.
Note
• When the height or direction of the pro-
jector is adjusted, the image may become
distorted (keystoned), depending on the
relative positions of the projector and the
screen. See page 33 for details on the
keystone correction.
Using the Swivel Stand
You can adjust the angle and direction of the
projected image by using the Swivel Stand.
1
Unlock the lever on the Swivel
Stand.
2
Adjust the angle and direction
of the projected image as you
want by lifting up the projec-
tor and rotating the projector
on the Swivel Stand.
3
Lock the lever on the Swivel
Stand.
Adjustable up to
±10° from the
standard position.
Adjustable up to
±25° from the
standard position.
Adjustable up to
±3° from the
standard position.
Swivel Stand
LOCK/UNLOCK
lever
03.10.29, 2:40 PM Page 23