beautypg.com

Assembly – Shindaiwa 81359 User Manual

Page 6

background image

6

Figure 5

Cutting Attachment Shield

Install the Cutting Attachment Shield C242

1. Insert the cutting attachment shield

between the outer tube and the cutting

attachment mounting plate. See Figure 5.

WARNING!

NEVER operate the unit without the
cutting attachment shield installed
and tightly secured!

CAUTION!
Make sure the clamp screw and
retaining nut are securely tightened
before tightening the four socket-head
cap screws.

NOTE:

It may be necessary to loosen the retaining

nut and clamp screw to adjust cutting attach-

ment shield mounting plate.

2. Fit the two shims and the bracket over

the outer tube and loosely install the

four socket-head screws. See Figure 5.

3. Tighten the four socket-head cap screws

to secure the cutting attachment shield.

4. Re-tighten clamp screw and retaining nut.

Assembly

Sub-Shield C242

(when trimmer head is in use)

1. Attach the shield extension to the

cutting attachment shield. See figure 6.

WARNING!

NEVER use this machine without
sub-shield when using a trimmer
head.

CAUTION!
Make sure the sub-shield is
completely hooked at the hook
receiver.

Sub-shield

Hook

Hook

Receiver

Cutting Attachment Shield

Outer

Tube

Socket-

Head Cap

Screw

Clamp Screw

Retaining

Nut

Cutting

Attachment Mounting

Plate

Shim

Shim

Bracket

Cutting

Attachment

Shield

Line Cutter

Figure 5A

Cutting Attachment Shield

Sub-shield with

Line Cutter

Figure 6