Star Tech Development TSP100 - Manual (Page 27)

– 24 –
2) Non-recoverable errors
Error Description
Head thermistor error
Board thermistor error
VM voltage error
VCC voltage error
EEPROM error
USB error
CPU error
RAM error
POWER Lamp
Flashes at 0.5-second
intervals
Flashes at 2-second inter-
vals
Off
Flashes at 1-second inter-
vals
Flashes at 0.25-second
intervals
Flashes at 5-second inter-
vals
Off
Off
ERROR Lamp
Flashes at 0.5-second
intervals
Flashes at 2-second inter-
vals
Flashes at 1-second inter-
vals
Flashes at 1-second inter-
vals
Flashes at 0.25-second
intervals
Flashes at 5-second inter-
vals
Off
On
Recovery Conditions
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Note:
1) If a non-recoverable error occurs, turn the power OFF immediately.
2) If a non-recoverable error occurs, please consult the dealer for repairs.
3) Paper cut error
Note:
If the cutter does not return to its home position or does not perform the initial movement, it
will result in a non-recoverable error.
4) Paper detection error
Error Description
Paper cut error
POWER Lamp
Off
ERROR Lamp
Flashes at 0.125-
second intervals
Recovery Conditions
Recovered by turning the power OFF, elimi-
nating the cause of the error such as jammed
paper, returning the cutter to its home posi-
tion, and turning the power ON (see 7-3).
Error Description
Paper out error
POWER Lamp
On
ERROR Lamp
Flashes at 0.5-
second intervals Recovery Conditions
Automatically recovered by loading a new
paper roll, then closing the printer cover.