Star Tech Development TSP100 - Manual (Page 24)

– 21 –
5. Thermal Roll Paper Specification
When consumable parts have run out, use those specified below.
5-1. Roll paper specification
Thermal paper
Thickness: 65~85 µm (excluding Mitsubishi HiTec F5041)
Width: 79.5±0.5 mm (57.5±0.5 mm when the paper roller holder is used)
Outer roll diameter: ø83 mm or less
Take up paper roll width: 80 mm or (58 mm when the paper roller holder is used)
Core outer/inner diameter
Core outer Core inner
ø18±1 mm ø12±1 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the roll paper or its core.
Do not fold the tail end of the paper.
5-2. Recommended paper
Note:
1) The print density may vary depending on the type of roll paper, operating environment, and
power consumption mode.
2) A reader or scanner may not be able to scan a printed bar code or characters depending on
the print density. Make sure that your reader or scanner is able to scan correctly beforehand.
5-2-1. U Model
+0.5
-1 +0.5
-1
Manufacturer
Mitsubishi Paper
Mills Limited
Mitsubishi HiTec Pa-
per Flensburg GmbH
Oji Paper Co., Ltd.
Nippon Paper Industries
Kanzaki Specialty
Papers Inc. (KSP)
Product
name
P220AG
HP220AB-1
P220AGB
PB670
PB770
F5041
PD150R
PD160R
PD750R
PD700R
TF50KS-E2C
P320RB
P320BB
Quality characteristics/Use
normal type paper
high image stability paper
normal type paper, card ticket
2 color paper: Red & Black
2 color paper: Blue & Black
normal type paper
normal type paper
high image stability paper
2 color paper: Red & Black
2 color paper: Blue & Black
normal type paper
2 color paper: Red & Black
2 color paper: Blue & Black
Paper thickness
(µm)
65 (thickness)
75 (thickness)
80 (thickness)
75 (thickness)
75 (thickness)
60 (thickness)
75 (thickness)
65/75 (thickness)
75 (thickness)
75 (thickness)
65 (thickness)
65 (thickness)
65 (thickness)