Samsung YP-60V - Manual (Page 9)

17 16
Connect a USB cable to the USB port on the computer.
Connect the opposite end of the USB cable to the USB cable
port on the right side of the yepp.
● If you disconnect the USB cable from your PC while
implementing a command or initializing during
USB driver installation, your PC may not function correctly.
5
Upon installation of the USB driver
"SAMSUNG YP-60" will appear in the
[Start] → [Settings] → [Control Panel] →
[System Properties] → [Device Manager]. 7
4
The USB driver is installed with a message saying that
it is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that
installation has been successfully completed. 6
USB connect cable
How to check the USB driver
● Windows 98/ME:
Control Panel → System → Device Manager →
Disk drives → SAMSUNG YP-60
● Windows 2000:
Control Panel → System → Hardware →
Device Manager → Disk drives →
SAMSUNG YP-60 USB Device
● Windows XP:
Control Panel → System → Hardware →
Device Manager → Disk drives →
SAMSUNG YP-60 USB Device
When the USB driver is not installed automatically, refer to the next page.
8
Connecting the yepp to a PC with a USB cable
Connecting the yepp to a PC
YP60_AME ENG i 9/21/04 9:2212:0 Page 16