Ps9 rear panel, Guided tour - powerstrip ps9 rear panel – Samson PowerBrite Pro7 User Manual
Page 6
Guided Tour -
PowerStrip PS9 Rear Panel
1: Switched AC outlets (horizontal mount) - Connect external
equipment to these standard 3-pin AC outlets, which are turned on and
off from the front panel Outlets switch (see #2 on the previous page).
2: Switched AC outlets (vertical mount) - Similar to the AC outlets
described in #1 above, these are mounted vertically so as to
accommodate external transformer AC power adapters.
4
115V 60Hz 15A
MAXIMUM 15 AMPERE LOAD FOR ALL 9 OUTLETS
SAMSON
or
PS
9
SWITCHED
SWITCHED
PowerStrip
PS9
1
2
See also other documents in the category Samson Tools:
- Pro Rack-Mount Power Distribution PB15 (16 pages)
- S. phantom S Class (32 pages)
- C03 (8 pages)
- 3-STRAND Class I Eye Splice (1 page)
- 3-STRAND Class I Long Splice (2 pages)
- 3-STRAND Class I Rope-to-Chain Splice (2 pages)
- 8-STRAND Class I End-for-End Splice (3 pages)
- 8-STRAND Class I Eye Splice (3 pages)
- 8-STRAND Class II End-for-End Splice (3 pages)
- 8-STRAND Class II Eye Splice (3 pages)
- 8x3-STRAND Class II End-for-End Splice (3 pages)
- 8x3-STRAND Class II Eye Splice (3 pages)
- 12-STRAND Class I End-for-End Splice (2 pages)
- 12-STRAND Class I Eye-and-Eye Tail Splice (3 pages)
- 12-STRAND Class I Eye Splice (2 pages)
- 12-STRAND Class I Eye Splice Modified for Quik-Splice (2 pages)
- 12-STRAND Class I Whoopie Sling Modified for Tenex and Tenex-TEC (2 pages)
- 12-STRAND Class II End-for-End Splice (2 pages)
- 12-STRAND Class II End-for-End Splice Modified for Dirty, Used Rope (4 pages)
- 12-STRAND Class II Eye Splice (2 pages)
- 12-STRAND Class II Tuck-Bury End-for-End Splice (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for HMPE (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for Saturn-12 (3 pages)
- 12-STRAND Class II Whoopie Sling Modified for AmSteel and AmSteel-Blue (2 pages)
- 16-STRAND Class I Eye Splice (3 pages)
- DOUBLE BRAID Class I Back Splice (2 pages)
- DOUBLE BRAID Class I End-for-End Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice Modified for Used Rope (4 pages)
- DOUBLE BRAID Class II End-for-End Splice (2 pages)
- DOUBLE BRAID Class II End-for-End Splice Modified for Turbo-37 (4 pages)
- DOUBLE BRAID Class II Eye Splice (3 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II and TS-II Premium (5 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II Turbo (8 pages)
- DOUBLE BRAID Class II Eye Splice Modified for Turbo-37 (5 pages)
- DOUBLE BRAID Class II Tips for Stripping the Cover (4 pages)
- DOUBLE BRAID Special Tips for Splicing Double Braid (1 page)
- DOUBLE BRAID Special Tips for Splicing Double Braid Used Rope (1 page)
- ROUND PLAIT Class I End-for-End Splice (2 pages)
- ROUND PLAIT Class I Eye Splice (3 pages)
- MISCELLANEOUS Lock Stitching, Whipping, and Seizing Procedures (2 pages)
- MISCELLANEOUS Smooth Ice/Flavored Ice Cover Installation (3 pages)
- MISCELLANEOUS Tools Required for Splicing (2 pages)