Samsung SP-U300M - Manual (Page 14)

2-3-2 Installation and Connection
1. Click the right mouse button on the Windows desktop and click on [Properties].
tab will appear.
2. Click on [Settings] tab and set the by referring to described in the display mode table
supported by this projector.
You do not have to change the setup.
3. Press the [Advanced] button. Another property window will appear.
4. Click on [Monitor] tab and set the by referring to described in the Supported
Resolution/Size Modes table.
This will set both the vertical and horizontal frequencies.
5. Click the [OK] button to close the window, and click the [OK] button of the window to close the window.
The computer may restart automatically.
6. Shut down the PC and connect to the projector.
•Process might vary depending on your type of computer or Windows version.
(For example, [Properties] appears instead of [Properties (R)] as shown in 1.)