Soho NBG800 User Manual
Page 37
SOHOware
®
Secure Cable/DSL Router 29
Connect-on-demand --- This setting allows the BroadGuard to automatically make
a connection to your BSP whenever you launch an Internet application. The
default setting is “Yes”.
Maximum Idle Time Before Disconnecting --- If there is no activity on the
connection longer than the time set here, the connection will automatically be
dropped.
If your Broadband service provider assigns you a static IP address, you must set
Use PPPoE DSL Service to NO. Next check Specify an IP Address and enter all
IP address information into all fields. If not, you can skip this step.
Figure 37. DSL Broadband Connection
Click Save and Restart to start sharing your broadband connection.