SoundCraft D-Mix 500 - Manual (Page 6)

With a wide variety of choices in both inputs and outputs, the D-MIX500 delivers
class-leading flexibility in a cost effective package. A total of seven input channels,
four main stereo, one auxiliary stereo and two mono, each with two inputs, will handle
up to ten stereo input sources. To keep the DJ fully informed of selected signal sources
and outputs, coloured LEDs accompany every major switch on the front panel. Both
professional and consumer CD output levels are catered for, and three RIAA equalised
phono inputs accommodate turntable pickups.
The D-MIX500 is designed as a high performance mixer for the professional DJ. Front
panel controls are kept to a minimum to give a clear and uncluttered appearance while
providing sufficient flexibility and choice to meet individual requirements.
The design of the mixer allows for a choice of installations from standard 19" rack
mountings, occupying 7U of height, to free standing use on a desk top or table.
All connections are on the rear panel of the mixer for easy access once installed.
Channels
The D-MIX500 contains a variety of channels as follows:
Two Mono Mic/Line Input channels with insert point and 3-band EQ.
Five Stereo Input channels, with two switched stereo sources and a 3-band EQ.
A Master section containing main outputs, monitoring, master faders and metering.
Metering
The mixer is fitted with three meters:
Main Left and Right outputs.
Cue Mix.
Power Supplies
The console requires the D-MIX500 power supply.
Part No. Voltage
HB0166 120V
HB0167 230V
HB0169 220V
Introduction
1.2 D-MIX500 Introduction