Sony CCD-TRV37 User Manual
Page 36
36
Note (CCD-TRV87 only)
You cannot use the following functions while using the fader function. Also, you cannot
use the fader function while using the following functions.
– Digital effect
– Low lux mode of PROGRAM AE (Overlap/Wipe function only)
– Super NightShot
– Tape Photo recording
The date, time indicator and title do not fade in or fade out
Erase them before operating the fader function if they are not needed.
If you do not record anything before operating the wipe or overlap function
(CCD-TRV87 only)
Your camcorder stores the image on the tape. As the image is being stored, the WIPE or
OVERLAP indicator flashes quickly, and the picture you are shooting disappears from
the viewfinder. Depending on the tape condition, the picture may not be recorded
clearly.
While using the bounce function, you cannot use the following functions:
– Focus
– Zoom
– Picture effect
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
– D ZOOM is set to the mode other than OFF in the menu settings.
– Wide mode
– Picture effect
– PROGRAM AE
Using the Fader function