Sony CCD-TRV37 - Manual (Page 28)

28
Viewing the recording on TV
If your TV or VCR is a monaural type
– CCD-TRV87 only
Connect the yellow plug for video and the white plug for audio on both your
camcorder and the TV or the VCR (you do not connect the red plug).
With this connection, the sound is monaural.
To connect to a TV or VCR without Video/Audio input jacks
Use an NTSC system RFU adaptor (not supplied).
Refer to the operating instructions of your TV or VCR and the RFU adaptor. With an
RFU adaptor, the sound is monaural even on stereo models.
If your TV or VCR has an S video jack (CCD-TRV67/TRV87 only)
Connect using an S video cable (not supplied) to obtain high-quality pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable.
Connect the S video cable (not supplied) to the S video jacks on both your camcorder
and the TV or the VCR.
Monitoring the picture from a TV or VCR (CCD-TRV87 only)
You can monitor the picture on the LCD screen. Connect your camcorder to the outputs
on the TV or VCR.
Using the AV cordless IR receiver
– CCD-TRV87 only
Once you connect the AV cordless IR receiver (not supplied) to your TV or VCR, you
can easily view the picture on your TV. For details, refer to the operating instructions of
the AV cordless IR receiver.
(1) After connecting your TV and AV cordless IR receiver, set the POWER switch
on the AV cordless IR receiver to ON.
(2) Turn the TV on and set the TV/VCR selector on the TV to VCR.
(3) Press S.LASER LINK. The lamp of S.LASER LINK lights up.
(4) Press N on your camcorder to start playback.
(5) Point the SUPER LASER LINK emitter at the AV cordless IR receiver. Adjust
the position of your camcorder and the AV cordless IR receiver to obtain clear
playback pictures.
S.LASER LINK
SUPER LASER LINK
emitter