Sony SLV-D370P User Manual
Page 99
Ad
d
itiona
l In
fo
rm
ation
99
US
General setup information
Menu choices
The default settings are indicated in bold print.
4
Press SET UP to exit the menu.
Menu option
Set this option to
Auto Power Off
• “Off” to deactivate the Auto Power Off function.
• “1Hr”/“2Hr” to turn the DVD-VCR off automatically if no
signal is received and you do not press any of the buttons
during this time.
RF Output Channel
• “3CH” when using channel 3 to receive the VCR signal.
• “4CH” when using channel 4 to receive the VCR signal.
For details, see page 99.
Setting the RF Output channel
When connecting the DVD-VCR to the TV
using only the antenna cable, you must set
the RF Output channel in the “OPTION
SETUP” menu so that the TV can receive the
correct signal from the DVD-VCR.
1
Set the RF Output channel to “3CH” or “4CH” (see page 98 to set the channel), whichever
channel is not used in your area. If both are used, set the switch to either channel.
2
Press ?/1 to turn on the DVD-VCR.
3
Press TV/VIDEO to turn on “VIDEO” in the
DVD-VCR’s display window.
4
Press CH +/– to display a channel number in the display window.
Select an active channel number in your area.
TV/VIDEO
CH +/–
?/1
continued