Sony SLV-D370P - Manual (Page 12)

12 US Setting up the remote commander
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
• Do not leave the remote commander in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so
may cause a malfunction.
The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the
following table, set the appropriate manufacturer’s code number.
* for Sony TV only
Controlling TVs with the remote commander
1 Set TV / DVD·VIDEO switch at the top of the remote commander to TV.
2 Hold down ?/1, and enter your TV’s code number using the number buttons. Then release
?/1.
Buttons Operations
?/1 Turns your TV on or off
VOL +/– Adjusts the volume of your TV
CH +/– Selects the channel on your TV
Number buttons and ENTER* Selects the channel on a Sony TV
MUTING* Mutes a Sony TV equipped with the muting function
TV/VIDEO Switches your TV’s input source