Sony Trinitron KV-VF21M70 - Manual (Page 28)

28
Basic Operations
Recording TV programs (continued)
Checking/adding/
changing/canceling
the timer settings
1
Press TIMER REC.
To exit the PROGRAM
LIST after checking the
settings, skip steps 2 and 3.
To add, change or clear the
settings, follow steps 2
through 4.
2
Press < or , to move the cursor to ADD, CHANGE or CLEAR,
then press ENTER.
3
To add new settings
Follow steps 2 through 4 of “Setting the timer” on page 26.
To change the settings
Press
M or m to move the cursor to the setting you want to change,
then press ENTER.
Follow steps 2 through 4 of “Setting the timer” on page 26.
To clear the settings
Press
M or m to move the cursor to the setting you want to clear,
then press ENTER.
The setting is cleared and “--” appears.
4
Press < or , to move the cursor to OK, then press ENTER.
If there are other timer settings on the list, the video TV enters the
timer recording standby mode and the TIMER REC indicator
lights up. The PROGRAM LIST disappears.
When the timer settings overlap
The second program starts recording only after the first program
has finished.
A/B
G-CODE
COUNTER RESET MENU
REW
TIMER REC ON/OFF TAPE SPEED
INDEX z REC
X PAUSE
x STOP
m
FF
M
. >
PLAY
ENTER
PIC MODE
H
TIMER REC
M/,/m/</ENTER
PROGRAM LIST 27 SAT 20:00
DATE START STOP PRG
28 SUN 21:00 22:00 6 SP
29 MON 1:30 3:00 79 LP
MON·SAT 18:50 19:00 2 SP
EVERY TUE21:00 23:30 1 LP
OK
SET ENTER SELECT
ADD CHANGE CLEAR
Programmed as below
TIMER REC