Siemens WD7005 - Manual (Page 34)

32
Pull up the insert.
Rinse the detergent dispenser under hot running
water.
Push down the insert until it clicks into place.
Insert the detergent dispenser.
Clean the drain pump
This is necessary if the washing solution can not
be completely drained. The pump is blocked by
either loose debris or fluff which accumulates if
fluff-giving fabrics are washed at high temperature.
The water in the drum should be drained first
before cleaning the drain pump. Have a suitable
container ready.
Draining the washing solution
Risk of Scalding
Allow the hot washing solution to cool.
Turn the programme selector to Off .
, , ,,
Fold down the cover panel.
Carefully remove the pump cap. But do not fully
remove it and allow a little more residual water
flow into the suitable container.