Т³ 26, Spin speed, Start time – Siemens WD7005 User Manual
Page 26
24
Spin speed
The maximum displayed spin speed depends on the
selected programme.
Press button until the required spin speed.
If setting --- (without final spin) has been selected,
the washing remains in the final rinsing water.
, ,
,,
Before the laundry can be unloaded, the Empty or
Spin programme must be performed. Or pressing
button to select the desired spin speed.
The spin speed can be changed at any time by
pressing the button until the desired speed is
displayed. Setting --- (without final spin) is
possible until the Rinse programme section starts.
, ,
,,
Start time
Before a programme start, you can specify by how
many hours the start of the programme is to be
delayed.
Press the button, appears in the display.
Press the button until the desired number of
hours is displayed.
The start time can be set in 1-hour steps. The time
can be delayed up to a maximum of . If a start time
of has been set , the programme duration time
can be accessed by pressing the button again.
The first line of the programme flashed between
and .
The time delay is counted down by the hour. When
the start time has elapsed, the program starts auto-
matically and the programme duration is displayed.
Changes to the start time or an immediate start
are possible. To do This:
- Briefly set the programme selector to another
programme.
- Press the start time. The programme starts.
- When the programme selector has been reset
to the original programme, individual or all other
settings may have to be re-selected. If required,
reset the start time.
, ,
,,