Sangean PR-D9W - Manual (Page 19)

18
3
1-2,4
GB
Setting the time format
The clock display used in stand-by mode and on the playing mode
screens can be set to 12 or 24 hour format. The selected format is then
also used when setting the alarms.
1. With your radio switched off, press and hold the Band/step button
until the radio beeps once and the display shows FM tuning step
setting flashing.
2. Press and release the Band/step button, and the display will show
AM tuning step setting flashing. Press and release the
Band/step button again, and the display will show time format
setting flashing.
3. Press the Tuning Up / Down button to select either 12 or
24 hour format.
4. Press and release the Band/step button to confirm the setting.
If the 12 hour clock format is chosen, the radio will then use the 12 hour
clock for the setting of alarms, and will display a 12 hour clock for the
setting of alarms, and will display a 12 hour clock with an AM or
PM indicator.