Sangean PR-D9W - Manual (Page 13)

12
3-4
2-4
GB
Setting up the tuning step increment
1. Make sure your radio is in power off mode.
2. Press and hold the Band/step button until the FM tuning step setting
begins to flash.
3. Press the Tuning Up / Down buttons to select either 100kHz or
200kHz for FM radio, and press and release the Band/step button to
confirm the setting. And the AM tuning step setting will begin
to flash.
4. Press the Tuning Up / Down buttons to select either 9kHz or 10kHz
for AM radio, then press and release the Band/step button to confirm
the setting.