Sangean PR-D9W - Manual (Page 12)

11
5
3
2
Manual tuning – AM/FM
1. Press the Standby button to switch on your radio.
2. Press the Band button to select the required band. Fully extend the
antenna for best reception.
3. Press and release the Tuning up/down button to tune to a station.
The FM frequency will change in steps of 100/200kHz and
AM frequency will change in steps of 9/10kHz.
4. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
5. Set the Volume using the Volume Up/Down buttons to the
desired settings.