Sangean PR-D9W - Manual (Page 18)

17
2,3
1,3-4
Clock and Alarms
Setting the clock manually
The clock of PR-D9W needs to be set up manually before the alarm
function can be used.
1. Press and hold the clock time button until the radio beeps once and
the hour digits of time setting begins to flash.
2. Press the Tuning Up / Down button to adjust the hour setting
as required.
3. Press and release the clock time button to enter the setting,
and the minute digits of time setting will begin to flash. Press the
Tuning Up / Down button to adjust the minute setting as required.
4. Press and release the clock time button again to finish the setting.
Your radio clock is now set.