Samsung DVD-V8600 - Manual (Page 19)

ENG-19
C O N N E C T I O N S
You must have the antenna connected
to set the Auto Clock
(See pages 11~12)
Connecting a Power Cord & Auto Setup
1
Your DVD-VCR's power cord should be plugged
into a standard 120V/60Hz wall outlet. Avoid
pressing any buttons on the remote control or on
the unit during Auto Setup. While your DVD-VCR
is running Auto Setup, “Auto” will blink. When
Auto Setup is complete, the current time will be
displayed on the front panel. If Auto Setup fails to
locate a channel to set the clock, you should set
the clock manually. (See page 22 to 23.)
2
Turn on the power by pressing the POWER
button on the remote control or on the front panel.
3
Turn on your TV by pressing the POWER button
on the TV remote control.
00743A V8600_eng1 3/11/05 2:15 PM Page 19