Savin 25105 User Manual

Page 7

What to do if Something Goes Wrong

270

The

[Connect]

key does not

appear on the display.

The master unit is in Preset
Jobs mode.

Exit Preset Jobs mode in
one of the following ways.

❖

If you are still selecting
copy settings and
copying has not started
yet :

Press the

[Clear]

key

then remove the origi-
nals set in the master
unit document feeder.

❖

If Preset Jobs mode is
in progress :

Press the {

Stop

} key,

follow the instructions
on the display then
press the

[Cancel]

key.

Reference

See “Preset Jobs”

⇒

P.60 “Job Preset”

The

[Connect]

key does not

appear on the display.

The “Connect Copy” of
User Tools setting is set to
“No”.

Change the setting to
“Yes” or press the

[Con-

nect]

key on the other unit.

Reference

See “Connect Copy”

⇒

P.269 “Connect Copy”

The Connect Copy cable is
damaged.

Please contact your service
representative.

L indicator is lit.

Follow the instructions
shown on the display.

Machine Status

Cause

Action