Sharp XL-35H - Manual (Page 30)

02/9/11 XL35H_H_E3.fm
E-23
ENGLISH
XL-35H
Ref
e
renc
es
" If trouble occurs
When this product is subjected to strong external interference (mechani-
cal shock, excessive static electricity, abnormal supply voltage due to
lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
" Clearing all the memory (reset)
Caution:
This operation will erase all data stored in memory including clock, timer
settings, tuner preset, and CD programme.
" Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
Maintenance
" Cleaning the CD pickup lens
" Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution,
then with a dry cloth.
Caution:
! Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may
damage the cabinet finish.
! Do not apply oil to the inside of the unit. It may cause malfunctions.
" Cleaning the tape-handling parts
! Dirty heads, capstan or pinch roller can cause poor sound and tape
jams. Clean these parts with a cotton swab moistened with commer-
cial head/pinch roller cleaner or isopropyl alcohol.
! When cleaning the heads, pinch roller, etc., unplug the unit which
contains high voltages.
! After long use, the deck's heads and capstan may become magne-
tised, causing poor sound. Demagnetise these parts once every 30
hours of playing/recording time by using a commercial tape head
demagnetiser. Read the demagnetiser's instructions carefully before
use.
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and plug in
the unit, and then turn the power on.
1 Press the ON/STAND-BY button to en-
ter the power stand-by mode.
2 Unplug the AC power lead from the AC
INPUT socket on the unit.
3 Whilst pressing down the MEMORY/
SET button and the button, plug the
AC power lead into the AC INPUT
socket on the unit.
AC INPUT
Do not touch the laser pickup lens. If fingerprints or
dust accumulate on the pickup, clean it gently with a
dry cotton swab.
Erase head Capstan
Recording/Playback
head
Pinch roller
D
A B C