Sharp XL-35H - Manual (Page 25)

02/9/11 XL35H_H_E3_2.fm
E-18
ENGLISH
XL-35H
8
7
6
5
4
3
2
1
T
a
p
e
Recor
d
ing
To interrupt recording:
Main unit operation:
Press the
button.
To resume recording, press the button.
Remote control operation:
Press the button.
To resume recording, press the button.
To stop recording:
Press the button.
The tape will stop. When the button is pressed again, the CD will
stop.
! Recording from the radio
To stop recording:
Press the button.
Notes:
" If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
" Whilst recording from the radio, the recording pause function
does not work.
! Erasing a recorded tape
1 Tune in to the desired station (see page 14).
2 Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3 Press the button.
Recording will be paused.
4 Press the ( ) button.
1. Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
2. Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
3. Press the button.
4. Press the ( ) button to start erasing.
Erase-prevention tabs of cassette tapes:
" When recording on a cassette
tape, make sure that the erase-
prevention tabs are not re-
moved. Cassettes have remov-
able tabs that prevent
accidental recording or erasing.
" To protect the recorded sound,
remove the tab after recording.
Cover the tab hole with the ad-
hesive tape to record on the
tape without the tab.
Side A
Tab for side B Tab for side A