Sharp XL-35H - Manual (Page 28)

02/9/11 XL35H_H_E3.fm
E-21
ENGLISH
XL-35H
Ad
v
a
nced
Feature
s
" To use timer and sleep operation together
Example: To fall asleep and wake to the same radio station
You can play back the same source only (the function cannot be
switched).
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
" Listening to the playback sounds from VCR,
DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
" To record on a tape from VCR etc.
1 Set the sleep time (steps 1 - 2, page 20).
2 Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 19 - 20).
1.Sleep timer setting
2.Timer playback setting
Timer playback
start time
5 minutes - 3 hours Desired time
Sleep operation will
automatically stop.
End time
1 Use a connection lead to connect the VCR, DVD, etc. to the VID-
EO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX
button.
4 Play the VCR, DVD, etc.
1 Load a cassette into the cassette compartment with the side to
be recorded on facing you.
2 Press the VIDEO/AUX button.
3 Press the button.
4 Press the ( ) button.
5 Play back the VCR etc.
VCR, DVD, etc.
White
Red
To the line output sockets
White
Red
RCA lead
(not supplied)