Cd pla ybac k – Sharp XL-35H User Manual
Page 19
02/9/11
XL35H_H_E2.fm
E-12
ENGLISH
XL-35H
8
7
6
5
4
3
2
1
CD Pla
ybac
k
„
To locate the desired portion
Notes:
z
Normal playback will resume when the
(
) or
(
) but-
ton is released.
z
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, playback will start when you release the
button.
„
Repeat play
All tracks or a programmed sequence can be continuously repeated.
To cancel repeat play:
Press the REPEAT button again.
" " will go out.
Caution:
After performing repeat play, be sure to press the button. Other-
wise, the disc will play continuously.
„
Random play
The tracks can be played in random order automatically.
To cancel random play:
Press the RANDOM button again.
"RANDOM" will go out.
Notes:
z
The random play will stop automatically when all tracks are
played once. (The same track will not be played back twice.)
z
In random play, the CD player will select and play tracks automat-
ically. (You cannot select the order of the tracks.)
z
If you press the
button during random play, you can move to
the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous
track. The beginning of the track being played will be located.
For audible fast forward:
Press and hold down the
button on the main unit or the
but-
ton on the remote control during playback.
For audible fast reverse:
Press and hold down the
button on the main unit or the
but-
ton on the remote control during playback.
To repeat all tracks:
Press the REPEAT button.
To repeat a desired track:
Perform steps 1 - 4 in the "Pro-
grammed play" section on page 13
and then press the REPEAT button.
Press the RANDOM button to be-
gin random play.