Operation with voice scrambler, Resetting the transceiver’s microprocessor, 2 operation with voice scrambler – Standard Horizon Hx 350s User Manual
Page 17
HX350S
Owner’s Manual
page 15
3. Press the MEM key to store the scrambler code in the transceiver's
memory.
The display shows:
4. Press the
or
key to set the scrambled channel (scrambled
channel = CH05).
The display shows:
5. Press the MEM key to store the scrambled channel in the transceiver.
“MEM” will be displayed on LCD.
6. To program other channels to be scrambled, repeat steps 4 and 5.
Only one scrambler code can be chosen for all channels programmed.
4.16.2 Operation with voice scrambler
1. Turn on the transceiver. Normal operation resumes.
2. Select a channel that was programmed for scrambler mode.
3. Hold down the MEM key for 1 second to turn the scrambler on. The
display shows “
S
” to indicate that the scrambler is activated.
4. Hold down the MEM key for 1 second again to turn the scrambler off.
T X
U S A
C A N
INTL
S
T X
U S A
C A N
INTL
S
M E M
T X
U S A
C A N
INTL
S