Scag Power Equipment SWZV - Manual (Page 31)

Section 7
27
MAINTENANCE
7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions
HOURS
Break-In 8 40 100 200 500 Procedure Comments
(First 10)
X Check all hardware for tightness
X Check hydraulic oil level See paragraph 7.3
X Check all belts for proper alignment See paragraph 7.8
X Change engine oil and filter See paragraph 7.4
(First 20)
X Check hydraulic hoses for leaks Use extreme caution when
checking the hydraulic hoses
See paragraph 2.5
X Check engine oil level See paragraph 7.4
X *Clean mower See paragraph 7.13
X Check condition of blades See paragraph 7.9
X Apply grease to fittings See paragraph 7.2
X Check tire pressure See paragraph 7.10
X Check Safety Interlock System See paragraph 4.2
X Check belts for proper alignment See paragraph 7.8
X Apply grease to fittings See paragraph 7.2
X Change engine oil See paragraph 7.4
X *Clean air cleaner element See paragraph 7.6