Sony Z1010 - Manual (Page 5)

This is the Internet version of the user's guide. © Print only for private use. 5
Getting started
To insert the SIM card and charge
the battery 1 Insert the SIM card. Make sure the SIM card is
placed under the silvery holders.
2 Place the battery on the back of the phone with
the label side up and the connectors facing each
other.
3 Place the back cover as shown in the picture and
slide it into place.
4 Connect the charger to the phone at the flash
symbol. The flash symbol on the charger plug
must face upwards.
5 It may take up to 30 minutes before the battery
icon appears on the screen.
6 Wait approximately 4 hours or until the battery
icon indicates that the battery is fully charged.
If you do not see the battery icon after this time,
press any key or
to activate the screen.
7 Remove the charger by tilting the plug upwards.
PIN (Personal Identity Number)
You may need a PIN (Personal Identity Number)
to activate the services in your phone. Your PIN
is provided by your network operator. When you
enter your PIN, the digits are hidden with an *,
unless your PIN starts with the same digits as an
emergency number, for example 112. This is so