Sony Z1010 - Manual (Page 31)

This is the Internet version of the user's guide. © Print only for private use. 31
Calling
• No reply – divert calls that you do not answer
within a specified time limit (operator-dependent).
To activate a call divert
1 } Settings } the Calls tab } Divert calls .
2 Select a call type and then one of the divert
options and select
Activate .
3 Enter the phone number to which you want your
calls to be diverted, or press
Look up to find the
contact in your phonebook, OK .
To deactivate a call divert
Scroll to the divert option and press
Deactivate .
To check all divert options
} Settings } the Calls tab } Divert calls } Check all .
More than one call
You can handle more than one voice call
simultaneously. For example, you can put an ongoing
voice call on hold, while you make or answer a
second call, and then switch between the two calls.
Call waiting service
If the call waiting service is activated, you hear a beep
if you receive a second call during an ongoing call.
To activate or deactivate the call
waiting service
} Settings } the Calls tab } Manage calls
} Call waiting .
To make a second call
1 Press Hold to put the ongoing call on hold.
2 Enter the number you want to call, Call .
Receiving a second call
When you receive a second call, you can do the
following:
• Select
Answer to answer the second call and put
the ongoing call on hold.
• Press Busy to reject the second call and continue
the ongoing call.
• Select Replace active call to answer the second
call and to end the ongoing call.
Handling two calls
When you have one ongoing voice call and one voice
call on hold, you can do the following:
• Press
Switch to switch between the two calls.
• Press and select Join calls to join the two calls
into a conference call.
• Press and select Transfer call , to connect the
two calls. You are disconnected from both calls.