Samsung BHM-1008 - Manual (Page 20)

19 Taking a Blood Pressure Measurement
f. As the monitor determines your blood
pressure, numbers will appear and
change on the display screen until your
reading is complete.
g. When your measurement is complete the
" " icon will appear. This is your signal
to deflate the cuff by depressing the Air
Release knob.
h. The process should take less than a minute
and once the measurement is complete your
blood pressure and pulse rate will be dis-
played. The monitor will turn itself off
approximately 1 minute after completing a
reading.
Deflation
Inflation
*If the bulb symbol again begins to flash, that is an
indication that more air is needed and you should resume
pumping until the flashing stops.
Taking a Blood Pressure
Measurement