Sony AVD-S10 User Manual

Page 25

Getting Star

ted

• R.SP. (rear speakers)

– LARGE: Normally select this. Specify the position and height to implement the Digital

Cinema Surround modes in the “Virtual” sound field (page 48) properly.

– SMALL: Select this if the small speakers are used for the rear speaker. Specify the position

and height to implement the Digital Cinema Surround modes in the “Virtual” sound field
(page 48) properly.

– NO: Select this if no rear speakers are used.

• S.W. (subwoofer)

– YES: Select this if the subwoofer is used.
– NO: Select this if no subwoofer is used.

DISTANCE

You can vary the distance of each speaker as follows. The default settings are underlined.
• F. D. 5 m (17 ft) (front speakers distance)

Front speaker distance can be set in 0.2 meter (1.0 foot) steps from 1.0 to 15.0 meters (3.0 to
50.0 feet).

• C. D. 5 m (17 ft) (centre speaker distance)

Centre speaker distance can be set in 0.2 meter (1.0 foot) steps from the front speaker distance
to 1.6 meters (5.0 feet) closer to your listening position.

• R. D. 3.4 m (12 ft) (rear speakers distance)

Rear speaker distance can be set in 0.2 meter (1.0 foot) steps from a distance equal to the front
speaker distance to a distance 4.6 meters (15.0 feet) closer to your listening position.

Note

If each of the front or rear speakers are not placed an equal distance from your listening position, set the distance
of the closest speaker.

Specifying the rear speaker position and height

If you select anything other than “NO” in “R.SP.,” specify the position and height of the rear
speakers. The default settings are underlined.

Position diagram

• R. P. BEHIND

Select this if the rear speakers are located in the section B.

• R. P. SIDE

Select this if the rear speakers are located in the section A.

continued