Sanyo EM-S1000 - Manual (Page 16)

NOTE:
The cancellation for the used No. can be done by inputting “0” when the display shows the number of times
used. When display shows “0000” flashing touch “Memory” key to finish the cancellation procedure.
Operational flow Display Window
“0” will appear on the display.
1.
2.
3.
4.
5.
6.
7.
Touch “Clear” Key
Touch “Time” key
Touch “Start” key again
Touch number
“9” four times
Touch “Start” key
Touch “Clear” key
Stage 1 bar & lower colon lights.
The “99.99” will appear on the
display.
Display shows number of times
course 1 has been used,
ie 428 times used.
16
HOW TO CONFIRM THE FREQUENCY OF EACH COURSE USED
The “99.99” will start flashing.
Touch “Start” key again
Display shows number of times
course 2 has been used,
ie 1125 times used.
* By touching Start key it is possible to check all 10 course memory functions.
The “0” will appear on the display.