Sanyo EM-S1000 - Manual (Page 15)

CHECKING ACCUMULATIVE COOKING TIME, NUMBER OF DOOR OPERATIONS
AND CONTROL OF THE BUZZER SOUND (DOOR MUST BE CLOSED)
Display shows accumulative cooking time or the number of door operations by key operation. Also, you can
change any remaining cooking time, buzzer sound or buzzer volume.
Stages 1 to 3 are the same for all options. Input the 4th digit as follows to check or change the modes.
The following modes can be selected by inputting one of the numbers below at the operation stage “4”
INPUT OPTIONS
1... Accumulative cooking time
2... The number of door operations. (100 times)
3... Indication of remaining cooking time (when
cooking is interrupted by door opening).
4... To cancel remaining cooking time.
5... Tone of the buzzer on cooking completion (Pip,
Pip, Pip)
6... The tone of the buzzer. (Peep)
7... The volume of the buzzer. (None)
8... The volume of the buzzer. (medium)
9... The volume of the buzzer. (None)
0... The volume of the buzzer. (None)
Operational flow Display Window
“0” will appear on the display
1.
2.
3.
4.
5.
6.
7.
Touch “Clear” key
Touch “Time” key
Touch “Start” key again
Input one of the following options
(1.0) using the course key.
Touch number
“8” three times
Touch “Start” key
Touch “Clear” key
Stage 1 bar & lower colon lights.
The “8.88” will appear on the
display.
EG Input “1”
(accumulative cooking time)
All 4 digits will be flashing.
The number “2:15” shows total
cooking hours OR
In case where options other than 1 or
2 were selected in stage 4, “0”
appears on display confirming that
the new setting has been accepted.
In case of option 1 or 2, the “C”
key must be pressed to clear the
display. (Not necessary for
options 3 to 0)
*
15