Sharp UX-5000 - Manual (Page 76)

18 or
If you want the document to be sent from
memory, press START.
If you want the document to be sent from the
feeder, press DOCUMENT. (This is not possible
if you made a timer setting.)
19
Press STOP one or more times until you return
to the date and time display.
START DOCUMENT
Batch transmission
(Continued from "Initial procedure".)
14
(Example)
Enter the fax number of the receiving machine
using one of the following methods:
•
Press a Rapid Key.
•
Press SPEED DIAL and enter a Speed
number. (If you enter less than 3 digits,
press START to complete the
entry.)
•
Enter a full number.
15
16
Adjust the resolution and contrast if desired
(otherwise skip this step).
17
18
19
Press STOP one or more times until you return
to the date and time display.
START
START
START
RESOLUTION
Q
CONTRAST
SPEED DIAL
1
START
STOP
STOP
ENTERING AND USING PROGRAMS
4-30 SPECIAL FUNCTIONS