Sharp UX-5000 - Manual (Page 44)

Checking copy operations in memory
You can display the status of copy jobs in memory by following the steps below. You
can also cancel copy jobs with this procedure.
Step Press these keys: Comments
1
Press the MEM. STATUS key (flip up the Rapid
Key overlay if necessary) and the "1" key.
"COPY STATUS" will appear in the display.
2 or
Press the "#" key or the "
*
" key to scroll through
the list of copy jobs. The time the original was
scanned into memory will appear in the display,
together with the 3-digit memory number
assigned to the job. To cancel a copy job, press
the CLEAR key and then the START key while
the copy job appears in the display.
3
When you have finished checking the list, press
the STOP key twice to exit.
STOP
W
MEM.STATUS
1
STOP
MAKING COPIES
3-18 BASIC OPERATIONS