Sharp UX-5000 - Manual (Page 64)

5 (Example) Enter the hour (2 digits - "01" to "12").
6 (Example) Enter the minute (2 digits - "00" to "59").
7 or Press " * " to select A.M., or "#" to select P.M.
8
(Example: Thursday)
Enter the day of the week by entering the
appropriate code number (see above table).
(Skip this step if the operation will be done within
the next 24 hours.)
9
Continue with the specific procedure for your
operation (see the following pages).
Transmission
(Continued from "Initial procedure".)
10
(Example)
Enter the fax number of the receiving machine
using one of the following methods:
•
Press a Rapid Key.
•
Press SPEED DIAL and enter a Speed
number. (If you enter less than 3 digits,
press START to complete the
entry.)
•
Enter a full number.
11
12
Adjust the resolution and contrast if desired
(otherwise skip this step).
13
14 Load the document
15 The document will be scanned into memory.
RESOLUTION
START
START
START
SPEED DIAL
1
Q
CONTRAST
START
0 0
4
START
1 0
TIMER OPERATIONS
4-18 SPECIAL FUNCTIONS