Sony DAV-LF10 - Manual (Page 65)

Sou
nd Adj
u
stm
e
nts
65 GB
Automatic decoding of the
audio input signal (AUTO
FORMAT DIRECT AUTO)
The auto decoding function automatically
detects the type of audio signal being input
(Dolby Digital, DTS, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as it
was recorded/encoded, without adding any
effects (e.g. reverberation).
However, if there are no low frequency signals
(Dolby Digital LFE, etc.), it will generate a low
frequency signal for output to the subwoofer.
Press AUTO FORMAT DIRECT repeatedly
until “Auto Format Direct Auto” appears in
the front panel display.
Using only the front speaker
and subwoofer (2 CHANNEL
STEREO)
This mode outputs the sound from the front left
and right speakers and subwoofer. Standard two
channel (stereo) sources completely bypass the
sound field processing. Multi channel surround
formats are downmixed to two channels.
This allows you to play any source using only
the front left and right speakers and subwoofer.
Press MODE repeatedly until “2Channel
Stereo” appears in the front panel display.
Sound field Display
AUTO FORMAT DIRECT
AUTO Auto Format Direct
Auto
AUTO FORMAT
DIRECT
With cover opened.
Sound field Display
2 CHANNEL STEREO 2Channel Stereo
MODE
With cover opened.
continued