Woodstock SHOP FOX W1704 - Manual (Page 13)

ASSEMBLY
-11-
Layout and inventory the package contents list-
ed below and familiarize yourself with the com-
ponents shown in Figure 8 to ease assembly.
Note: Some parts and hardware may already
be installed on the machine. Check the machine
when you use this inventory list.
1. Lathe Unit (not shown) ....................... 1
2. Spur Center..................................... 1
3. Live Center ..................................... 1
4. Face Plate ...................................... 1
5. 4 1 ⁄
4
" Tool Rest .................................. 1
6. 7" Tool Rest ..................................... 1
7. Knock-Out Tool ................................. 1
Item Qty.
Figure 8. Loose parts shipped with the lathe.
Inventory
Read and understand this
entire instruction man-
ual before performing
any operations with your
machine. Serious personal
injury may occur if safety
and operational informa-
tion is not understood and
followed.
The Model W1704 is
a heavy machine at
46 lbs. Use assistance
when lifting or moving
the machine.
2
3
4
5
6
7
ASSEMBLY
The SHOP FOX ® Model W1704 has been careful-
ly packaged for safe transporting. If you notice
the machine has been damaged, please contact
your authorized SHOP FOX ® dealer immediately.
Unpacking