Drive specifications summary – Seagate BARRACUDA ST3500410AS User Manual
Page 12

6
Barracuda 7200.12 Serial ATA Product Manual, Rev. H
Table 2:
Drive specifications summary
for 500GB models
Drive specification
ST3500418AS and ST3500410AS
ST3320418AS
Formatted capacity (512 bytes/sector)*
500GB
320GB
Guaranteed sectors
976,773,168
625,142,448
Heads
2
Disks
1
Bytes per sector
512
Default sectors per track
63
Default read/write heads
16
Default cylinders
16,383
Recording density (max.)
1413kb/in
Track density (avg.)
236 ktracks/in
Areal density (avg.)
329Gb/in
2
Spindle speed
7200 RPM
Internal data transfer rate (max)
1695Mb/s
Sustained data transfer rate OD (max)
125MB/s
I/O data-transfer rate (max.)
300MB/s
ATA data-transfer modes supported
PIO modes: 0 to 4
Multiword DMA modes: 0 to 2
Ultra DMA modes: 0 to 6
Cache buffer
16MB
Height (max)
19.98mm / 0.787 in
Width (max)
101.6mm / 4.0 in (+ 0.010 in)
Length (max)
146.99mm / 5.787 in
Weight (typical)
415g / 0.915 lb
Average latency
4.16ms
Power-on to ready (max)
<8.5s
Standby to ready (max)
<8.5s
Track-to-track seek time (typical)
<1.0ms read;
<1.2ms write
Average seek, read (typical)
<8.5ms
Average seek, write (typical)
<9.5ms
Startup current (typical) 12V (peak)
2.0A
Voltage tolerance (including noise)
5V +10% / -7.5%
12V +10% / -10.0%
Ambient temperature
0° to 60°C (operating)
–40° to 70°C (non-operating)
Temperature gradient
20°C per hour max (operating)
30°C per hour max (non-operating)
Relative humidity
5% to 95% (operating)
5% to 95% (non-operating)
Relative humidity gradient (max)
30% per hour
Wet bulb temperature (max)
37.7°C (operating)
40.0°C (non-operating)
Altitude, operating
–304.8m to 3,048m
(–1000 ft to 10,000+ ft)
Altitude, non-operating
(below mean sea level, max)
–304.8m to 12,192m
(–1000 ft to 40,000+ ft)
Operational Shock (max)
70 Gs at 2ms
Non-Operational Shock (max)
350 Gs at 2ms