Solid State Logic 4.3 - Manual (Page 48)

Soundscape Mixpander
Page 48 of 59
Modifying the routing
Mixer creation and editing is explained in detail in the SSL Soundscape Mixer Reference Guide.
However, you may already want to modify the routing of your signals in the preset configurations.
The procedure is described below.
The SSL Soundscape Mixer can operate in two different modes: Mixer Control mode and Mixer
Edit mode.
By default, the Mixer is in Control mode. You can use its various controls by clicking or clicking
and dragging them, entering values in some of the readouts, etc.
In order to edit any aspect of the mixer configuration, you must switch to Mixer Edit mode.
Toggling between Mixer Control mode and Mixer Edit mode can be done by pressing [E] on the
computer keyboard, or by clicking the Control/Edit mode toggle:
NOTE: The Control/Edit mode toggle looks like an arrow in Control mode. It changes aspect when
switching to Edit mode, as does the mouse pointer, which reflects the current tool selection.
Once in Edit mode, press [Ctrl]+[1] or click the I/O and DSP Assign tool icon to assign the
corresponding tool to your left mouse button: