Scanport Ricoh SP 1200SF - Manual (Page 21)

Setting Up the Machine
19
4 Set Your Country
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1
Check that the power is turned on by plugging
in the power cord and turn the power switch on.
Press OK.
Set Country
Press OK Key
2
Press or to choose the country
Country names displayed on the LCD depend
on the modes.
Australia
Select ab or OK
3
Press OK when the LCD shows your country.
4
The LCD prompts you to make sure of the
country again.
Australia?
1.Yes 2.No
5
If the LCD shows the correct country, press 1
to go to step 6.
Or press 2 to go back to step 2 to choose the
country again.
6
After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.
5 Selecting your language
(For EU, USA, Canada and
Asia)
1
Press Menu.
2
Press 0.
3
Press 0.
4
Select your language by using or and
then press OK.
5
Press Stop/Exit.