Samsung DVD-L70A - Manual (Page 77)

9
ENGLISH
Using the Remote Control Unit
Connecting Headphones to the DVD
I Installing the Battery in the Remote
I Operating Range of Remote Control Unit
Important!
Do not subject the remote control unit to strong vibration or shock.
Keep the remote control unit free from moisture and water.
Caution
• After battery replacement, your remote control unit may not work.
If this occurs, remove the battery and re-insert.
• It may be difficult to operate the remote control unit if the remote control
sensor on the DVD player is exposed to direct sunlight or strong artificial light.
Try operating the remote away from such light sources.
• Remove the battery when not planning to use the remote control unit for
a long period of time.
You can attach headphones with a stereo mini-jack plug (not supplied) to the PHONES jack
for private listening. There are two jacks available.
I How to use headphones
1. Insert headphones into the A or B PHONES jack.
• This jack is a stereo mini-jack.
Note: When headphones are connected to jack A, you will hear sound
through the headphones and over the speakers. When connected to
jack B, sound is heard through the headphones and is muted
over the speakers
Headphone B disables the speakers.
Important!
1. Turn the headphone volume down to the minimum setting before connecting.
2. Adjust the volume level by using the VOLUME control dial.
1. Remove the battery compartment in the direction of
the arrow.
2. Place the lithium battery in the battery compartment
and put the battery compartment cover back on the
remote.
• Match the polarities (+ and -) on the battery with the
marks in the battery compartment. If the battery is
inserted in the wrong direction, your remote control
may not work correctly.
Hole
(Back of the remote control)
Remote Control Sensor
L70A/75A-Eng-XEF 7/26/05 8:48 PM Page 9