Information menu, About the preset memory no – Sony Cineza VPL-HS50 User Manual
Page 43
43
GB
Information Menu
Us
in
g
t
h
e
Me
n
u
s
Information Menu
The Information menu is used to display the horizontal and vertical
frequencies of the input signal, used time of the lamp, etc.
You cannot change the displays above.
This projector has 32 types of preset data for input signals (the preset memory).
When the preset signal is input, the projector automatically detects the signal
type and recalls the data for the signal from the preset memory to adjust it to
an optimum picture. The memory number and signal type of that signal are
displayed in the Information
menu.
You can also adjust the preset data through the Signal
menu.
This projector also has 20 types of user memories for Input-A into which you
can save the setting of the adjusted data for an unpreset input signal.
When an unpreset signal is input for the first time, a memory number is
displayed as 0. When you adjust the data of the signal in the Signal
menu,
it will be registered to the projector. If more than 20 user memories are
registered, the newest memory always overwrites the oldest one.
See the chart on page 55 to find if the signal is registered to the preset memory.
When the aspect ratio of input signal does not match the screen size, a part of the screen
is displayed in black.
Item
Description
fH
Displays the horizontal frequency of the input signal.
fV
Displays the vertical frequency of the input signal.
(Memory No.)
Displays the preset memory number of the input signal.
(Signal type)
Displays the type of the input signal.
Lamp Timer
Indicates how long the lamp has been turned on.
Note
About the Preset Memory No.
Note
Exit:
Picture
Signal
Function
Setup
Installation
Information
fH :
fV :
60.00Hz
33.75kHz
No.7
1080/60i
Lamp Timer :
10H
Sel:
Memory No.
Signal type